Rust Inhibiting Primer
Two-in-One Rust Converter and Primer for Metal Roofs
Rust Inhibiting Primer is a water-based, single-component acrylic emulsion that combines rust conversion and priming in one step. Designed to simplify prep for metal roof restorations, it passivates red rust and creates a corrosion-resistant surface—ready for topcoating once the primer turns black.
There's no need to rinse between steps or worry about pot life. This time-saving solution delivers outstanding adhesion, effective corrosion control, and seamless compatibility with NanoTech's Cool Roof and All Weather systems. Just clean, coat, and go.
Get Instant Answers with Roovie AI
Calculate coverage, get recommendations, and ask questions about Rust Inhibiting Primer
AI responses are based on product documentation and are generally accurate, but should always be confirmed with a NanoTech Materials representative for critical applications.
What would you like to know?
Select multiple for a comprehensive answer
Tip: Select one or more topics below. You can combine multiple questions for a comprehensive answer!
Features & Benefits
Convert and Prime in One Step
- Passivates active red rust and primes simultaneously
- No rinse required between inhibitor and topcoat
- Turns black when fully cured and ready for coating
Fast, Simple Application
- Single-component formula with no mixing required
- Brush, roll, or spray—ideal for field work and hard-to-reach areas
- Applies at 10–13 wet mils with fast dry time (1–4 hours)
Strong Adhesion & Corrosion Resistance
- Anchors coatings to weathered metal substrates
- Prevents corrosion from reactivating under coatings
- Designed to extend system lifespan and reduce rework
Labor-Saving Efficiency
- Eliminates the need for separate rust treatment and primer
- Cleans up with soap and water—no solvents needed
- Compatible with water-based and solvent-based topcoats
Where to Use It
- Rusty or weathered metal roofs
- Seam and fastener reinforcement areas
- HVAC units, ducts, and structural supports
- Metal accessories and flashing before Cool Roof or All Weather application
- Corroded areas on tanks, panels, or containment systems
Product Videos
Technical Highlights
- Resin Type: Proprietary acrylic emulsion
- Solids by Weight: 60.3%
- Solids by Volume: 41.3%
- Viscosity: 1,200 cps
- Weight per Gallon: 11.9 lbs
- Coverage: 120–160 sq ft/gal
- Film Thickness: 10–13 wet mils / 6–8 dry mils
- Dry Time: 1–4 hours (ambient dependent)
- Application Methods: Brush, roller, or airless sprayer (.013"–.025" tip)
- Cleanup: Soap and water
- Color Change Indicator: Dries black to indicate full cure
- VOC: <1%
Supporting Resources
- • Two-in-one rust converter and primer
- • Turns black when ready for topcoating
- • No rinse required between steps
Take Action Today and Lock Out Rust for Good
Metal roof restoration starts with smart prep. Rust Inhibiting Primer simplifies corrosion control and primes the surface in one pass—saving time, labor, and risk of failure down the line. Use it to ensure a solid bond and lasting performance for your next coating system.